© 2018 Arkie Designs, Australia

  • White Instagram Icon
  • White Houzz Icon
  • White Pinterest Icon
  • White Facebook Icon

Handles for Core Range

We are offering some very special handles to compliment the Core Range, to add a beautiful architectural detail to your doors and drawers to help make them even more special.  

Please be sure to count your required handles carefully before ordering, count twice (or three times) and order once! 

Of course you are very welcome to find your own handle to add to our doors and drawers.

Please note all Arkie wall cupboard doors have been designed to overhang the carcass by 10mm to create a handle.

'Plain Door'

This door choice allows you to apply your own handle or if you intend to use the IKEA Push to Open door system.  

Plain Door is shown beside in Black Laminated Plywood with Black Laminated Plywood Counter-top.

 

 

'Finger Pull' Handle

A perfect circular hole approx. 40mm in diameter in the door or drawer face to create a simple method of opening, exposing the laminations of the plywood.

Positioned in the centre of a drawer 20mm down from the top edge, in the top corner of floor cupboard doors, to side indicating opening, and 800mm from bottom of tall doors, to side indicating opening.

It is the handle choice if you are ordering the 'Hole' Handles made by INTERIA (see below).

Finger Pull Handle is shown beside in White Laminated Plywood with White Laminated Plywood Counter-top.

 

 

  

 

'Cut Out' Handle

A rounded edge rectangular hole to allow finger access to pull open doors or drawers, exposing the laminations of the plywood.

Opening is approx. 130mm wide x 28mm deep.  Positioned in the top corner of floor cupboard doors, to side indicating opening, centre of drawers and 800mm from bottom of door for tall doors, indicating opening.  We suggest one Cut Out Handle only for double tall doors on your preferred side.

Cut Out Handle is shown beside in Black Laminated Plywood with Black Laminated Plywood Counter-top. 

 

 

'Hole' Handle made by INTERIA

This solid timber sleeve has been designed to fit our 'Finger Pull' handle hole, making a statement of this very simple method of opening. The design exploits the pleasing visual introduction of a circle to soften the strong vertical and horizontal lines of kitchen cabinets.  

Opening diameter is 37mm.  Suitable for doors and drawers.  Top corner of floor cupboard doors, to side indicating opening, centre of drawers and 800mm from bottom of door for tall doors, to side indicating opening. 

Available in solid Blackbutt (shown), Celery Top Pine and Oak.

Handle is for indoor use only, finished with a clear coating in a satin finish.

Please be sure to order your doors and drawers with a 'Finger Pull' option to be able to install these handles.  Add these handles on our quoting sheet.